Questions & Answers for: Suzuki DR-Z 125 rev 1 6

Question about 2005 DR-Z 125

1 Answer

...spec? Try adujsting the rev screw on the side of the carb, dont turn it any more than 1/8 at a time, turn it clockwise to increase revs, and anti-clockwise to decrease them Please rate my help, ...

Ad

Question about 2005 DR-Z 125

1 Answer

CANT GET IT TO IDLE If it has ever sat for more than a few months at any point, then there's a good chance that the carburetor has fuel varnish inside that has plugged up the very small internal ...

Ad

...air is inside it you need to replace it. More likely is a bit of lint or rust from the gas tank is preventing the float needle from closing. Clean the carb with spray carb cleaner. Don't mess with ...

I have a 2003 Suzuki drz 125. and when i got it it would rev really high cold or hot.''not weather" and so i bought a new carburetor and it ran fine for a while. then after i left it alone for a ...

Question about 2003 DR-Z 125

1 Answer

...towards the cylinder. It may ahve a brass plug covering the screw. This is done at the factory to prevent tampering for emissions purposes. The plug can be removed by taking a very small drill bit ...

Is there only 1 oil used for both engine and gear box on Suzuki DR 125 1987 You can do it that way but most gear boxes use a DTL or UGL and it is a straight weight oil.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...