Questions & Answers for: retaining nut

Question about 2005 Forenza

2 Answers

...battery cable. 2. Drain the engine oil from the engine crankcase. 3. Remove the exhaust flex pipe retaining nuts from the exhaust manifold. 4. Remove the exhaust flex pipe retaining nuts from the ...

Ad

FRONT HUB AND BEARING NUT RETAINER REMOVAL - 2002 MUSTANG NEVER SEEN A RETAINER LIKE THIS ONE. EVEN IF I LIFT THE TABS OUT OF THE AXLE THREAD IT WILL NOT COME OFF. IS IT POSSIBLE THE RETAINER IS ...

Ad

...retaining nut from either side of the luggage compartment and pull the light body assembly from the vehicle. Turn the bulb socket(s) counterclockwise to the stop and remove the socket(s) from the ...

Question about 1994 Explorer Limited

1 Answer

retaining nut socket (1-in drive) about 2 7/16th in or 61/62mm (I got mine at NAPA with a 1/2 in to 1-in drive converter) BUT BEFORE loosening the nut there is a small keeper under the bottom edge the

...retaining nut dust cover. NOTE Do not use an impact gun to remove the hub retainer nut. Fig. Using suitable tools loosen and . . . Fig. . . . remove the hub retaining nut dust cover Remove the wheel ...

How to change 2007 dodge 1500 front struts? Removal & Installation Independent Front Suspension ? 2WD Vehicles To Remove: Before servicing the vehicle, refer to the precautions at the beginning of

how do you take off the front beariing on a 1992 lincoln town car? there is a wierd nut type thing when you take off the cap. thats because the wheel bearing is one big one that presses into the ...

Moen 87786 Kitchen Faucet, seized and now Broken cartridge retainer ring/nut removal? Moen 87786 faucet, 1224 cartridge, the fiber retainer ring was seized, soaked with calcium remover then with ...

How do you remove retainer nuts on a Chevrolet Camaro tail light? A new 2019 Camaro tail light assembly has 4 regular screw off nuts and 2 (harder to get at) on the outer area of the assembly, ...

retaining nut: If you have difficulty releasing the retaining clips, check to see if there is a retaining nut that needs to be removed. This nut is usually located on the back of the machine, near the

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...