Questions & Answers for: restart unbalanced washing machine

...unbalanced load noises. I stopped it,redistributed load and tried to restart. It restarted in spasms so I took the clothes out and tried to restart the full cycle. It tries to fill in spasms -- as ...

...it blinks dc but i ran it empty and it worked ok what do I do? I am out of warranty. This machine is a nightmare its ok dc means the clothes are unbalanced..even the load open lid and ...

...unbalanced load the washing machine stopped I,m not sure! After moving the tub around and trying different dialed positions the washing machine start working again, maybe a "timed" reset elapsed or ...

unbalanced load stopped machine will not restart why? On some of the maytag washers when an unbalanced load stops the maching it blows an internal fuse located behind the front panel on some stacking ...

Unbalanced Load Light During the 1st 10 seconds of the spin cycle (with no clothes in washer) the un-balanced light come on and the machine stops. By moving the tub around a little I get it to restart

...spin, the load of cloth may have become unbalanced. Stop the washer and redistribute the cloths, then restart the machine. Repeat these steps if necessary. Thanks It's the clutch if its not ...

...first hear the sound .stop the machine center the load in the drum start machine. Unbalanced loads will do that. Lift the lid wait for the machine to coast to a stop even it out close lid to

unbalanced load stoped it mid cycle no codes shown how do you restart Normally you re position the load until it is evenly distributed around the tub. Close the lid and press resume or restart.

unbalanced U The machine do not usually distribute the load evenly around the wash tub so that your help is needed at times this happens. Rearrange the wash load so that it is evenly distributed ...

...unbalanced load stops I cannot restart to just spin it always refills again When loads become unbalanced it stops without completing spin cycle and if I stop it with the button to rearrange the load ...