Questions & Answers for: Hayward restart

my hayward pool pump started making a humming sound then shuts off. when I try to start the pump it starts humming then trips the breaker and then again shuts off check impeller by turning shaft with ...

No power I had to turn my pump off to replace a hose, then restarted it. It ran for about 2 minutes, then just shut off. I thought it had tripped a fuse, but after checking, then trying different plug

...into pool when system is shut off. I have to bleed the air off of the filter canister every time I restart the pool. You have an air leak somewhere draining down the system. You might need check ...

...filter yesterday for 4 hours and then shut it off. do i need to do anything different when i restart it today? no just turn it on pumps and filters are sized to turn over the pool volume in 6 ...

My Haward 3/4 hp pump stopped working today. It will not restart and everytime I turn on the switch, it trips the breaker. The wall switch is good. bad motor replace whole pump

I have air trapped in my hayward sand filter Filter gurgles whenever pump is restarted check for leaks in intake union or pump top seal

Pool motor runs slowly for a couple of seconds then trips.To restart one has to wait for truflex plate to click but same result when you try again. Replaced melted capacitor with a25 was 30 before ...

my Hayward Power Flo LX Pump is turned on/off with a remote. It worked fine last year but remote does not work this year and I have to unplug electrical cord to cut off each time. did you try new ...

Keypad Failed Error 66 echostar vsp pool pump The pump cut off and will not restart. I am unsure what this error code means. need new pump

Hi. I have a Hayward H350FDN pool heater that is Doing this: • Turn on and Temp at 65 • On for 3 1/2 min then shuts down • Restarts and then on for 5 min, shuts down • Restarts and then on for 2 min, ...