Questions & Answers for: resetting zanussi dishwasher Dishwashers

Dishwasher was tipped and won't run My Zanussi DE6850 was tipped when we moved house (actually it was put on its side i think) and now the 'washing cycle' and 'drying cycle' lights flash ...

zanussi zdt 6252 will not allow user to select program.???? I had the same problem with Zanussi ZDT 6252. To fix it, turn power on, close door fully, then open door, turn off then turn back on again. ...

Zanussi ZDT6252 stops 1min into cycle I have had a leak with dishwasher and when locating leak had dishwasher in bits and had to stop/start dishwasher to prevent water spilling everywhere. Fixed leak ...

...falt code 5 could u help me out Hi ya, Zanussi dishwasher zsf 6161 error i30. I tilted it back, mopped up. Used dishwasher cleaners, cleaned around door, filters but it happened again. Any

reset button where is the reset button To reset, try turning on, close door fully, open, turn off, then turn back on again. Don't know of any reset button.

Zanussi ZSF 6161 Dishwasher error codes We have a Zanussi ZSF 6161 dishwasher with a problem. When the unit is switched on and a program selected, the diswasher powers up for a couple of seconds, then

zanussi ZDT 6252 dishwasher Replace the timer. Most likely it was broken by someone resetting the timer by hand while the unit was energized. Always open the door(de-energizes the timer) when you want

...dishwasher working. press the on/off switch and a green light will flash but will go off again and nothing happens. please help. Ray My Zanussi ZDT 6503 INTERGRATED DISHWAHER IS STUCK ON A PROGRAME ...

anti-flood device activated Check your debris trap usually found at the bottom of dish washer and clean. May need to reset or unplug to reset devise. See what happens after cleaning, good luck, best ...

...Zanussi zdt6252 dish washer To reset a programme in progress, open the door and press the push button of the programme under way for more then 1 second, until the corresponding indicator light goes ...