...reset unit and test with a Rinse/Spin cycle. Q4:Is the washer overloaded? -->Single bulky items (comforters) or extremely large loads can add extra weight to the drum which stresses the motor. Remove ...
...reset and directly conduct test 7? Thanks, Chris If you remove the front cover hitting the reset switch is rather easy. However I did that the other day and only got 1 load done before it tripped ...
...LE is overloaded motor- most likely speed/direction sensor. Call 1-877-714-7486 for LG reset proceedure and verification test. Sensor is inboard of motor removed from the back. Hope this ...
...reset unit (unplug for 1 minute, restart) and test with a Rinse/Spin cycle. 99% of all "LE" Faults on LG Washers is a failed hall sensor on the drive motor stator. Replace either p/n 6501KW200(1) or ...
Question about WM1814CW Front Load Washer
reset the unit and run a test rinse and spin cycle. Has the washer been overloaded? Single bulky items or large loads can add extra weight to the drum and place stress on the motor. Remove some of the
Question about TROMM WM2688H 4.0 cu.ft. Front Loading SteamWasher
reset the unit and run a test rinse and spin cycle. Has the washer been overloaded? Single bulky items or large loads can add extra weight to the drum and place stress on the motor. Remove some of the
...the motor moves much more. I can cycle through several test modes this time but last time the motor did not move at all. Thanks, Jay Jay, have you tried to unplug it for about 20 minutes to reset
Question about WM-2277HW Front Load Washer
...reset. Step 1: Unplug the washing machine. Step 2: While the washer remains unplugged, press and hold the [Start/Pause] button on the front panel for 5 seconds. Step 3: Plug the unit back in, and run ...
reset and the EE error code is considered fixed or repaired. 2 - If the code does not clear on the washer after unplugging it multiple times, this means the main electronic control board is faulty and
Question about WM-2277HW Front Load Washer
...test mode. What could be the problem? Got LE error code. Put washer in diagnostic mode and when in spin tests it spun. Got no error codes. Put washer into Rinse & Spin mode with no cloths loaded. ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions