Questions & Answers for: Nissan how to reset it to scan

turn off and on they leave no code on computer? What is your question? They should time out Did you scan for codes with scan tool? Reset by disconnecting battery for 10 min and see if issues come back

check engene light to reset check engene light on I will like to reseted can try disconnecting battery of car for 1 min and reattach should reset > some cannot be resetted untill the code is ...

...my 2002 nissan altima You need to use a scan tool to reset the accelerator unit in your car. This scan tool is required as it connect to your cars computer to reprogram the throttle. hope this

...on nissan altima 2001. thanks Nothing counts until you fix the issue causing the light to illuminate. After that the scan tool can reset the light, or you can disconnect the battery and it will

...cars and trucks even after the problem is fixxed you strill need a scan tool to reset the light, so to answer your question i would scan it and then fix the problem, a scan tool is needed. good

...scan tool will reset code. also make sure all connectors are connected good, the computer may reset itself after it sees a few key cycles and tests the system and it passes but it may take awhile. i ...

...was corrected. You can also reset the light with a scan tool or code reader. Once again if you turn off the light the system will turn it back on in a short time if the problem is not

... and turn off the light after a certain amount of hours or drive cycles.. If you do not want to wait for that you can connect to the car with an OBD2 scan tool and reset them with the scan

...fuel reset button? if you are referring to the long term and short term fuel trims within the pcm you would need a factory scan tool to update/reset it. may i ask why you need to reset the fuel

do that ever. (infinite customers in line) you do or they do anyone can with a dirt cheap scan tool do a reset. but there are other models. and im guessing yours and have a big chance to be wrong. see