Questions & Answers for: reset reader

...i have no manual! alaso it froze on me help! Use a pin or paperclip to reset the reader. The books should still be there but it will reset the reader to its default and allow it to reset and

reader, how do i reset it. diij electronics provides remote password reset service for portable readers. The password reset service is for TA 32 /TA48 not mini 400 a>>sa7 seems exeba-comm is the

...reset the Reader. ,,,regards ..i hope this was helpfull Possible the set has hung up and so give it time to reset. Try to reset after some time, if not the set will do so when the battery drains off ...

...reset the reader back to factory default state. Just copy everything you have there again from your computer after the reset. WARNING: A hard reset will erase all content on the Reader. 1. Power off ...

...reader you may try to reset it: 1. Disconnect the reader from the computer 2. Hit the reset button at the bottom of the reader for 3 seconds 3. Slide the power switch 4. Screen will blink and will ...

...Reset: 1. With the reader disconnected from the computer, hit the reset at the bottom of the reader for 3 secons 2. Slide the power switch, the screen will blink and will show "Opening Book". Allow ...

...reader 3. Hit the reset at the bottom for 3 seconds 4. Power on you reader 5. The screen will blink and will display "Opening Book", let the reader load your books See if the problem persist, if so, ...

Reader 2. Hit the Reset button at the bottom of the Reader 3. While the reader shows 'Opening Book...' press and hold the 'Back' button and the 'Volume Up' (+) both at the same

Reader 2. Hit the Reset button at the bottom of the Reader 3. While the reader shows 'Opening Book...' press and hold the 'Back' button and the 'Volume Up' (+) both at the same

...reader you can reset it by plugging in the code reader then turn key on but do not start. Then select reset all giving code reader time to scan and reset First the problem has to be fixed. After that ...