Questions & Answers for: NetGear reset password sharp wizard

password On most model Netgear wireless routers there is a reset button on the back of the router which reset the router back to the default factory settings. The location of this button is printed on

...line with the router installed. I get 401 error message. Try http://192.168.0.1 or http://192.168.1.1 username should be admin with a password of password. To reset hold the reset button for 10 ...

...password. You can reset all the setting including password by Resetting the Router. To reset the Router, press the reset button with a sharp pointed object located at behind of the Router near ...

...password then you will need to reset the router and reconfigure the router. I hope the following link will help you. Click Here for step by step solutions press the reset botton at the back of thre ...

password to access the router page then you have to reset the router Ensure that you have all the details regarding your internet connection before resetting the router If you reset the router you can

...password then reset the router for 20-30 secs pushing the reset button. powercycle the router for 10 secs. then open the router page> -- http://192.168.1.1 or http://www.routerlogin.com or ...

...reset and set up another user name and password. 192.168.0.1 There should be a small hole with reset button on the back of the router, accessed with a sharp object like a pen or a straighten paper ...

...reset it to factory settings. There is a button next to the power inlet prees it with a pen. Here is how you acces the router again: IP address: 192.168.0.1 type this in your browserUsername: ...

...password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is ...

...password...no go??? What's up with that? Can't get to setup wizard..so stressing try 192.168.1.1 if that don't work try to reset to factory default reset to factory default press and hold ...