Questions & Answers for: reset paper tray fax copier

...paper size. Pull out the tray and look along the right side towards the rear is a blue lever that alows setting of standard and custom. It should normally set to standard. If that does not help do a ...

...a paper feed without paper. The paper feed and delivery trays are removable so remove them and carefully reset them. Making sure the paper is well fanned reload and retry. Come back with the

...the paper and press the OK button. Output Tray is closed: open it. OFF is selected for AUTO PRINT RX: select ON. You pressed the Stop/Reset button to cancel printing of a fax: press the FAX

...paper face dopwn in tray". Does the tray come out on a C6180 and if so, how? I've unplugged, changed the ink, tried the scanner, feed tray and nothing works. Scanner doesn't light up to scan. I use ...

...reset to Tray # 2 to where it will stay there? Printer Defaults button? what magical land is that found in? Here is the real solution: In Printers and Faxes, right-click the printer Click Printing ...

...paper drawers, reset the code again and then close each drawer one at a time waiting 15 seconds between each tray closing. If you close a drawer and it pops the code after a few seconds then that is ...

...paper size to the size of the print jobs; this sounds off but works in may cases. To reset the papersize, pull out the tray and put it back in, manually set the page to whatever it is calling for. ...

...on, it does copy but then spits out blank fax covers unless you pull out the paper tray to stop it - I have tried to reset but no luck. How do I get it off fax mode? talk to me iwant more ...

WON'T PRINT - STARTS THEN STOPS WITH A MESSAGE THAT THERE IS A PAPER JAM IN THE MANUAL FEEDER reset the manual feeder or tray 2.and chk the paper sprator

paper tray guides. If you are able to print normally from this model, despite the 'stuck' faxes, then it could be that you have been sent a document that is not the same size as that in your tray. Try