Questions & Answers for: reset onkyo amp

...reset - needs repair. but you are under WARRANTY - use it. Your Amp is going into a Protect mode due to the damages of the power transistors and the two 0.22 ohm resistor. Go to you tube and search ...

My Onkyo Tx-605 Has lost on screen programing it's a headache to read small script on the amp. Can it be fixed? try to look for reset button and reset the whole system..

...reset the AV receiver to its factory defaults, turn it on and, while holding down the [VCR/DVR] button, press the [ON/ STANDBY] button (see page 93). Manual... page 5 ...

...reset from the amp protect mode Onkyo receiver TX-SR600? My receiver is in the Amp protect mode. How do I reset my amp / receiver from protect mode ? if your receiver is in protect mode then that is ...

...reset again ,and then try Firmware update ,if it dont help contact your nearest Onkyo dealer :) Please contact our Parts & Services Dept at the number listed below during normal business hours ...

...RESET BUT DIDNT WORK. There is a Onkyo recall or service program being offered. I'm not sure if your unit is included, but here is a site to check the serial number to see if it's qualified: ...

Onkyo 5010 amp. Blue light went out in front and sound stop coming out. I clicked the power button and a click occurs inside the unit like its powering up but still no light or sound coming from amp. ...

...Hello, you seem to be in technician test mode. Unplug the receiver for an hour, turn on and perform a reset by holding vcr/dvr and then on/standby. This should resolve your issue. Thank you, Onkyo ...

onkyo reciver is stuck on auto sp set up You should reset the amp to factory default to see if audyssey disappear. Unfortunately, over 90% using reset to kick audyssey out does not work. What can I do

...reset as well. Kindly help ‘I have a onkyo av receiver Tx-sr309 that is stuck on BD/DVD mode and no other keys/buttons on the receiver nor the remote functions. Not possible to do factory reset as ...