Question about 1997 Grand Caravan
...reset the "check engine light" and the oil change light on a 1997 caravan. I have searched the manual but no success. pull positive cable for atleast 10 min and should reset computer. if not i would ...
reset the oil light to the 2005 dodge grand caravan, you will turn the ignition to the on / run mode. Move the gas pedal slowly three times in 10 seconds. Change the ignition switch to the lock button
...reset the oil light if oil light is on, you need to change your oil. or at least the car things you need to change it according to the last time the oil light was reset. check manual on how to reset ...
Question about 2007 Caravan SXT Minivan New Cars
...on and stayed on. How do I properly reset the oil indicator light or could there be a more serious problem with it. that light usually indicates low or no oil pressure, or a broken oil presssure ...
oil sneding unit and it doesnt reset wat can i do to reset it there is no reset button on my dash what you can do is unplug the negative cable from your battery for at least half hour and then plug it
...few thousand miles, just a reminder to change oil. To reset it I believe on yours turn the key on press the excellerator pedal 3 times within 5 seconds, turn the key off. This should clear the
Question about 2009 Grand Caravan
...There is also a mobile app for your phone that has all the oil maintenance light reset procedures from these guys. Hope this
...reset the oil change light on my 2013 veloster turbo what steps do i take to reset the oil change light on my 2013 hyundai veloster I know for a lot a vehicle you put your key on all light came on ...
Question about 2013 Veloster
...light on. my OBD code is PO520-engine oil pressure censor/ switch circuit malfunction where is it located on engine? george go to autozone.com web site and enter your vehicle info. you can then surf ...
Question about 2013 Grand Caravan
...with Araldite Rapid Epoxy. Leave an hour or two to cure. https://www.google.com/search?q=2013+Dodge+Grand+caravan.oil+sending+unit .. Get a new brass piece and screw it in, instead of pressing it
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions