Question about 24 in. MDBH950AWS Built-in Dishwasher
...it starts randomly, like one in every 50 times you press the buttons. I have unplugged it to reset several times. Nothing is working. I'm looking for a solution to blinking lights and it not ...
Question about MFI2568AES Stainless Steel Bottom Freezer French Door Refrigerator
...reset filter light for at least 3 seconds? After changing the filter, you must reset the Filter Change Indicator Light by simultaneously pressing and holding the "light" and "lock" buttons until the ...
Question about 25.6 cu. ft. Wide-By-Side Refrigerator with PuriClean II Ice and Water
...good. What can I do? My manual says to "Press and hold the LIGHT and LOCK pads until the CHANGE FILTER light blinks (approx. 3 seconds). The control is now reset for 12 months or another 416
...light will not go off. There is no visibile reset switch or button!!! Water Filter Status Indicator Light (select models) The Water Filter Status Indicator Light serves as a reminder to replace the ...
Question about MZD2665HE Side by Side Refrigerator
...light turns red, it will remain red until function is reset. To Reset Indicator: ? Press and hold both the Lock and Water buttons simultaneously for four seconds. The green filter status indicator ...
...light reset. To reset CHANGE FILTER light: Press and hold the LIGHT and LOCK pads until the CHANGE FILTER light blinks (approx. 3 seconds). The control is now reset for 12 months or another 416 ...
Question about MZD2766GES Side by Side Refrigerator
...light ? Press and hold the "Reset Filter" button until the indicator lights go off if your model refrigerator has a "Reset Filter" button on the control panel. Step 4Hold the "Lock" and "Light" ...
...whatever to reset the light, replaced water filter and it still stayed lit. Hold the light and lock buttons in for about 20 seconds to reset the filter indicator . Take the battery out for 60
Question about MSD2432G Side by Side Refrigerator
...light can be reset by holding down on the 'lock' button and the 'water' button simultaneously for three seconds. Sometimes, it is the 'lock' and the 'light' button you need to press down on ...
...the filter was changed. How do I reset the light. On the dispenser panel you should have a light pad and a lock pad If you hold both the light and lock pad in for about 3 seconds the light will
Usually answered in minutes!
469 Questions
292 Questions
196 Questions
168 Questions
98 Questions
