power surge (power failure). I will appreciate your help. Thanks. Silly question but, did you try to reset the TV by unplugging it for 2 minutes then plugging back in? Its worth a shot if nothing else
...JVC 36" TV will not power on and has a blinking power light." That means that the protection circuit has started because a fault had been detected. If this happened after a power surge it is likely a ...
...reset button for tv. DTV box has been reset and works on other tv's. Hello celiap, There is no reset button in the way you are thinking of a reset button. However because the TV is responding with a ...
Question about HC-P4752W 47" Rear Projection HDTV-Ready Television
...jvc. power surge from a lightning storm i believe it to be a power surge from a lightning storm. the tv turns on, but when it does the screen is completely scrambled. menu settings on screen show up ...
...TV was plugged into a power strip with a surge arrestor, the power strip may need a reset (if there is a reset button) or replacement (those surge arrestors are only good for so many "hits". Try ...
...JVC LT-47X788 47 in. HDTV LCD Suspected power surge took out TV, cable modem, phone modem and router. Unplugged TV to try to reset - no luck can't locate any other kind of reset. Nothing in manual ...
...JVC AV-30W475) no longer turns on but the on timer light is on, what could possibly be my problem? thank you..... The TV has been spiked by a power surge. You could try to unplug it for several hours ...
...JVC LT-23X475 won't turn on. Had a storm, but TV was plugged into surge protector and everything else that was plugged into the same surge protector still works fine. Anything I can do? If not, is it ...
Question about LT-42X579 42 in. LCD TV
...JVC flat screen won't turn on, tried unplugging and resetting. Stand-by light is still on. And it's attached to a surge protector than to the wall. I've only had this for 1 ...
Question about HD-70G886 70" Rear Projection HDTV
...JVC 70 G886 HD TV]. Screen went to all green (wide and thin) within 1/2 hour and picture hasn't come back. "Input selection" box is visible and clear without any vibration; TV has sound. Screen went ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions