Questions & Answers for: Canon reset eprom

reset your Canon i9100 be sure to remove the ink head itself before attempting and then replace after, it won't work if you don't, I almost threw away 2 good printers before I read this today. Stopped

...printing and is showing a ##334 error code. What do I do? Hi, #334 is an eprom error, try turning it on and off to reset it, if it doesn't work there might be a problem with the main logic

...reset waste tank full error in MP730. 1. Hit the "menu": Key 2. Hit "Copy" Key 3. Hit "#" Key 4. Scroll thru the menu headings until you come to "Test Mode" - 12th heading 5. Hit the "3" button- this ...

...reset waste tank full error in MP730. 1. Hit the "menu": Key 2. Hit "Copy" Key 3. Hit "#" Key 4. Scroll thru the menu headings until you come to "Test Mode" - 12th heading 5. Hit the "3" button- this ...

...eprom error and if turning on and off does not reset it, you have something going on with the main logic board. http://printer1.blogspot.com/2009/01/canon-multipass-mp730-service-manual.html Above is ...

reset software for MP190 to date exist. btw, some IC's are marked QK1-3696 obviously the MCU. TPC8778, K824Q, SN0507087 and more. MP190 main board is QK1-5045-02. and there one more IC. so one of this

...reset software for MP190 to date exist. but to start, the same logic apply for MP160, that will hold true for MP190, the eprom chip holding the ink counters has to be erased or overwritten. btw, some ...

...reset and make use of their printer but to buy instead. based on the logic of MP160 and similar MP series canon printer. The same will apply for MP190, the resetter should be able to access the ...

...it says 8-3. Now press the Select key. The menu will now say "EPROM Clear" Select "Ink Count" - Option 0 - and press "Set" Press "Stop/Reset" and the power switch. Wait for the printer to

...reset waste tank full error in MP730. 1. Hit the "menu": Key 2. Hit "Copy" Key 3. Hit "#" Key 4. Scroll thru the menu headings until you come to "Test Mode" - 12th heading 5. Hit the "3" button- this ...