Question about DVR-625 DTV Receiver / 100-Hours Video Recorder
Sansui DVD recorder DVR 1038. Can I reset the recorder to factory settings? Repost this in the DVD section to gain access to a more qualified set of experts in relation to this issue.
Question about DVR-625 DTV Receiver / 100-Hours Video Recorder
...to record a program and got error message simlar to...Can't access program guide. Program guide is there and appears to be good. hit master reset .. if that doesn't work rma the dvr needs update ...
Question about ViP622 DVR DTV Receiver / 180-Hours Video Recorder
...DVR after a hard reset, most likely the hard drive is a goner. You can still use the reciever to watch T.V., but you will not be able to record. There is no point in trying to replace the drive ...
...Dvr and pause do not work.all else OK. Try a hard reset, disconnect from outlet for 2 minutes. If that does not work, check to see if you get an error code, 311 or 024 and if so, your receiver needs ...
Question about ViP622 DVR DTV Receiver / 180-Hours Video Recorder
...reset dvr by holding power it will reset and i get picture and audio. This just started happening but will do it every time now. Is this my hdmi port going on dvr and should i just get a new dvr. Get ...
Question about ViP622 DVR DTV Receiver / 180-Hours Video Recorder
...reset dvr by holding power it will reset and i get picture and audio. This just started happening but will do it every time now. Is this my hdmi port going on dvr and should i just get a new dvr. Hi ...
...dvr Hi cesarchivas2 what you will need is your password to unlock your receiver, if you do not remember it you will need to call in and reset your password. Then you will have your receiver unlocked, ...
...reset itself. Now I have no access to the DVR feature. When I press record I get an Error 024 - "Unable to access this feature at this time. Data not available." It won't pause live TV either. Hey ...
Question about ViP722 DTV Receiver / 350-Hours Video Recorder
...Tries unplug,replug the DVR box an hour later.The box should reset itself and update it software.The box should work normal again.Not,call Dish Network to replaced the box,have intermittent
DVR it just needs to be reset. Unplug it for 5-10 seconds and plug it back in. It will reacquire signal and the guide. If that doesn't work run a check switch test from Menu-> System Setup (6)->
Usually answered in minutes!
1,193 Questions
265 Questions
120 Questions
120 Questions