...drum. To reset the drum follow the instructions below: Open the front cover of the printer. Press and hold down Go button for about 4 seconds until al the LEDs light up. Once all 4 LEDs are lit, ...
...drum kits and the toner light is still on. unable to print. what's the problem? Drum counter usually has to be reset.. Check user manual or go to Brother's site if you want to drive yourself crazy ...
...drum. You need to reset the toner end-of-life condition. Open the Front cover Press and hold the GO button Power ON the printer while continuing to hold the GO button All 4 LED's will light up and ...
...reset and the drum light is still on. I did this again and the light is still on. Costly as that was I bought another drum and toner and still the drum light is lit! I really do need help with this ...
...Drum Reset Instructions The Drum LED continues to blink if the drum counter was not reset when you replaced the drum. To reset the drum follow the instructions below: Press the cover release button ...
...drum, paper) will light up solid Press the GO button 5 times Paper light will be blinking At this point the toner end-of-life condition has been reset. Close front door. BTW, I got this from Brother ...
Question about HL-2070N Laser Printer
...reset the drum I have solid black line at the left side of the paper after reset the drum Try moving the blue panel to clean the drum after you install the toner. plus before you do that, you need to ...
...drum and reset the printer for that to go away, open the front door and hold the go button til all lights flash and the drum is reset. If quality is OK you can keep using the old drum. If you press ...
...drum on HP 2070N. Drum is changed. Light is still on. Thanks! You need to have the front of the printer open, when you press and hold the "Go" button. All four lights will come on, in sequence. ...
...reset the printer - Machine off - Front cover OPEN - Switch on the machine while holding down the ?GO? button - Check that the TONER/DRUM/PAPER leds are lighted - Release the ?GO? button and check ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions