Questions & Answers for: reset cd tray

...reset button" so I can give it a try. Thanks to everyone! hello poopig1, after further review, I meant to describe this: look for a pinhole in the area of the CD tray to insert a pin...similar to the ...

...CD tray and the orange light flashes twice, when I open up the top lid and watch the tray go in it seems to hit on the rear white strip. Any ideas?? I have the same problem. This was a sudden ...

...reset/eject buttons. guide the cd tray so that the white pin guides into the slot on the bottom of the cd tray. You might want to look at the bottom of the CD tray to see the track. The white pin/peg ...

Reset button also doesn't do anything. Thanks! hI , to enject cd is look a piece of strong tooth pick insert to a small hole at right corner of cd changer , push and and push tooth pick until the tray

...reset the printer if you dont have the tool let me no Does the machine try to bring the tray in before giving the error or does it display error straight away? Does your CD tray have a clear plastic ...

...out paper clip insert it and prush in to the pin hole on the front of the CD drive, manaully pull out the CD tray and remove the CD. Push the CD tray back. it will reset on the next computer

...reset printer no fix. any solution? I had my PC repaired recently because it lost the CD ROM. I have had this problem ever since. It seems your printer cannot seem to recognize the CD tray. Purchase ...

...reset the grabber(component which takes cd from tray to the reader), placed tray back in place. powered on system opened door placed cd on tray. The cd fed tray mechanism spins, cd plays. But then ...

...CD players have plastic gears. The gears can be stripped if someone has pushed the tray instead of using the open/close button. If you hear grinding noises, more than likely the player is shot. ...

...reset the CD player and resolve any temporary issues. Contact Pioneer customer support: If you've tried the above steps and still can't insert a CD into the player, it's best to contact Pioneer ...