Question about AVR-1508 Receiver
...AVR-1508 and a 5.1 speaker system hooked up to that. My issue is that the only mode that seems to play the subwoofer is the DOLBY PLII CINE mode, and in that mode something seems wrong with the ...
...reset code for the denon avr 1508? Turn the unit off by main switch (not a standby button). Press and hold "Speakers-A" and "Speakers-B" buttons and turn on main switch. Display blinks. Release the ...
...reset my Denon avr-589? I would like to reset my reciever back to original settings. Press the power button, and speaker a and speaker b simultaneously and hold until the display begins to flash then ...
..."input mode" and "speakers" button simultaneously 3) press and hold the main power button for seconds, until display flashes. 4) release all those buttons. The AVR is already reset to factory
...avr 1508 is turn off i just paid 24 dollars said time was out i hope not Generally speaking, an amp protects itself from heat, shorts and overloads. Check for loose speaker connections. Overloads can ...
...avr 1508 goes into protection mode after 5 minutes of play. i have 8ohm speakers. I'm thinking heat. Generally speaking, an amp protects itself from heat, shorts and overloads by refusing to turn on ...
i lost the sound on my denen avr-1508 receiver tried to balance speakers and lost the sound and cant get it back You may reset your unit to factory default settings. Check user manual.
lost the sound Try maxing the volume if not reset hope this helps :)
AVR 1508 when moving house. When I connected it up again there is bad distortion on the left surround, left back surround and a little on the left front speakers. Using one known good speakers, I have
..."input mode" and "speakers" button simultaneously 3) press and hold the main power button for seconds, until display flashes. 4) release all those buttons. The AVR is already reset to factory
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions