Questions & Answers for: GMC Yukon reprogram

...ing is security light stays on when ing is on eng start then shuts off after a second. You need to reprogram the security system. Hook up a battery charger. Turn the key on, the security light

need reprogramming instructions for gmc yukon worked fine yesterday. today stopped working totally. replaed battery twice and nothing. i was told to reprogram it. how do you do this? Hi dose the other

program a remote to 2001 gmc yukon will have to visit the chevy or gmc dealer for reprograming the remotes using the tech-2. hope this helped

...temp truck is pre wired for it. I put a 02 Denali cluster in my 01 silverado no problems. GM can reprogram hours and odometer if you

Hello, I have a question, how to do yo reprogram the remote control on a 2004 GMC Yukon? CLOSE ALL DOORS INSERT KEY INTO IGNITION.DO NOT TURN THE IGNITION SWITCH.PRESS AND HOLD DOOR LOCK SWITCH IN THE

How do you reprogram the security system after changing the ignition case Will need visit your dealer.

Took my 2009 Yukon in to have the module assembly reprogrammed for the rear tailgate. I had a friend, who is a 22-year GM mechanic replace the rear latch assy. When he tested it, a configuration error

2003 yukon starts with the remote, runs about 30 seconds then shuts off, then restarts for 30 seconds and shuts off, over and over remote start might need reprogrammed check for codes in system ...

Need to bypass the remote wiring in a 1998 gmc yukon to start my car nope not recommended. you will have to have the computer reprogrammed for this. you can if you want its probably not gonna be cheap

...reg is more about the electronics than the trans swap out --you ll need the harness --switches and reprogram/flash the computers --mounts--cross members and other brackets and such ----oin one of