Questions & Answers for: report fax sent

...report: 1. Press the [Fax/Scan] key to display the Fax mode screen. 2. Touch [FAX Menu]. 3. Touch [TX Report] on the Set 1 tab. 4. Select how to output the report, and then touch [Enter]. ? Default: ...

...Fax Report Setup. Press to scroll through the following report types: Every Error: prints whenever there is any kind of fax error (default). Send Error: prints whenever there is a transmission error. ...

...from memory, you can include an image of the first page of the fax on the Fax Sent Confirmation report. Press Setup, press 2, and then press 2 again. Select On from the Image on Fax Send Report

...fax has been sent Look on page 31 to set Fax Call Report Time, set it to "send fax only" for Tx confirmation report. ...

...report for each fax sent or received. A confirmation message indicating whether a fax was successfully sent appears briefly on the display after each transaction. To enable fax confirmation from the ...

...fax confirmation report when yousend and receive faxes successfully. This is the default setting. On Fax Send Prints a fax confirmation report for every faxyou send. OnFax Receive Prints a fax ...

...fax report. It is usually off by default, because most people can tell if the fax went through (and it will say so on your display) if the fax fails that is when a report it usually printed (by ...

...the party is sent it to received it There is a transmit report which can be auto printed for every fax message sent out. Go to menu, under the fax sub-menu, turn on the transmit report (under

...fax is NG report off+image--means report will be print out if the fax is NG + the image of the page that is not sent(so we know which page is not sent through the image) report on+image-- every fax ...

...report can be disabled at FAX SETUP.press menu and scroll to enter fax setup scroll to display report enter here to enable or disable the report. the sent report only display for short time after ...