Questions & Answers for: replacing tail

Ad

Question about 1999 RX 300

2 Answers

tail light needs replacing. This is the one on the car body, not the hatch. How do you access it? 1999 RX 300 First you need to lift the hatch. There are two screws under plastic caps. Remove the caps

Ad

NEED TO REPLACE A TAIL LIGHT BULB IN A 2005 CHEVROLET IMPALA NO! I AM TRYING TO FIND OUT HOW TO REPLACE TAIL LIGHT BULBS IN A 2005 CHEVROLET IMPALA. and Repair Notes TAIL LAMP REPLACEMENT REMOVAL ...

Ad

...taking out and replacing entire tail light assembly? dealership says I must replace all? Call a different dealer I never heard of that on any left or right tail lamp. center stop lights yes I ...

Question about 2005 Liberty

1 Answer

...tail light REPLACING THE BULB IS EASY. OPEN THE LIFT GATE, LOOK TO THE SIDE THAT YOU ARE REPLACING. RIGHT BESIDE THE TAIL LIGHT THE ARE TWO SCREWS. REMOVE THEM AND TAIL LIGHT SHOULD JUST PULL OUT. ...

how do i replace the tail light bulb? to replace the GM tail light bulb, you will drop down the tail gate and you will notice 2 screws on the tail light assembly, you will remove those 2 screws with ...

Question about 2008 H3

1 Answer

...replacing tail light bulbs is the same in all models. If you have a burnt-out tail light bulb, you may need to replace the brake light, the reverse light or the turn signal. The procedure to replace ...

Question about 1999 Breeze

1 Answer

...replacing tail lights and directions for replacing tail lights fuse. Thank you very much Open trunk. Remove the threaded wing nuts on each tail light assembly. With the wing nuts off, pull the entire ...

Question about 1998 Lancer

1 Answer

replacing tail light bulbs the auto parts store sales person will help you free of charge and help you replace bulbs.i have seen auto parts stores sales person help people replace batteries,windshield

passenger tail light out the top one replaced tail light socket still not working bulb is 3157 passenger tail light out i replaced the tail light socket light still now working These have a circuit ...

...tail lamp and the side marker lamp sockets, if replacing the bulbs. INSTALLATION PROCEDURE 1. Install the bulbs to the tail lamp and side marker lamp sockets, if removed. 2. Install the tail lamp and ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

john h

Level 3 Expert

23888 Answers

Brad Brown

Level 3 Expert

18665 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

6647 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...