Questions & Answers for: Ford F-250 replacing starter

starter won't kick in I started my 1978 Ford F-150, backed out of drive. It died, and when tried starting it, it clicked once and that was it. I've replaced an old battery w/a new one, replaced the ...

I have replaced the starter and selenoid in my 1989 F-250 3 times in the past 4 months. Why do they keep going? Go have your voltage regulator checked at autozone. Sounds like it is bad. It is putting

...replacing batteries but slowly.Now won't start checked terminals to battery and to starter both are clean of corrosion. Thinking might be starter or wire going to starter? Any suggestions would be ...

I have a 1990 ford f 250. When I try to start the car the starter winds up but doesn't turn the engine over. Someone told me the starter wasn't engaging and said it needs to be replaced but it started

WAS HAVEING PROBLEM WITH SARTER BECAUSE MY FLYWHEEL WAS MISSING TEETH JUST PUT IN NEW FLYWHEEL AND CLUTCH STILL HAVING PROBLEMS GETTING IT TO START DONT KNOW IF ITS SHIMED WRONG OR IF ITS THE WRONG ...

...flywheel but is spinning, that is a good indication that the solenoid has failed. On some years the solenoid is not available as a seperate part and may require replacing the entire starter

1986 f350 460 starter grinds when you try to start when the truck is hot. Relaced a dozen starters diffrent brands, replaced fly wheel, battery, ran a ground to starter to battery replaced solenoid ...

replaced starter and sylinoid in my 1989 f250 still wont start starter was sticking replaced it and starter sylinoid was starting then the starter wouldnt disengage replaced sylinoid again and now ...

starter problems starter engages but will not disengage until you disconnect the battery The starter solenoid is binding? Is this a new install? Did you use shim kit? If it is old then just replace ...