Questions & Answers for: replacing rusted brake line 1992

Question about 1992 S-10

1 Answer

1992 chevy s10 pickup how to remove brake switch the brake switch just pushes into the holder...its under the dash if you follow the brake pedal up toward the bottom of the dash you will see it ...

Ad

Question about 1992 Cutlass Ciera

1 Answer

...rusted brake line Hi, My Cutlass has a rusted metal brake line that has a hole in it right behind the driver rear wheel. It's right before the nut that seperates it from the wheel cylinder. I've had ...

Ad

Question about 1992 Pickup

1 Answer

...of a caliper issue, it may be sticking, rusted, or some issue like that. If one caliper IS stuck, I would def suggest replacing both at the same time, if one is bad, the other cannot be far

Question about 1994 S-10 Blazer

2 Answers

brake line for 94 Chevy S-10 pickup Instrument panel displaying Brake light. Put brake fluid in & pressed brake pad just to hear a noise like it spitting out just underneath my driver side door. I ...

replacing the brake line on a 1992 chevy lumina How do I replace the brake line on a 1992 chevy lumina? The brake line that is damaged is the passenger side rear brake line, it is rusted through. Have

...1992 Crown vics anti-locks stopped working after a tire swap. I just had my crown's rear tires swapped out. This may be a coincedence but now the antilock brakes stopped working as well as the light ...

Question about 1992 Dakota

1 Answer

1992 dodege dakota 4x4 problems changing the brake lines I was wondering if I could find a diagram somewhere You don't need a diagram to replace all the brake lines on that vehicle I had one for 18.5 ...

...rusted out too. So, I am thinking about replacing all brake lines by myself. Is it too difficult to do that? I googled the topic. But, I was unable to find a good answer. I have performed simple ...

...and fluid comes out good. Pedal still goes to floor but pumps up. B Everything was fine until brake line rusted out Try bleeding all your brakes at all wheels. Make sure air is out of all your

brake line rusted out over rear axle / repaired and not able to bleed rear brakes. Tested at master cly OK, but not bleeding out of ABS unit? How do I reset this? No reset on 98"s bleed all the lines.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...