Questions & Answers for: Chevrolet replacing rear brake pads 1999

...Rear Brake assy - I have replaced 2 Brake Pads and Rotor. After replacing and a test drive... Its making a scrapeing noise and now the rotor is extreamly hot and descolored. took it apart and found ...

...brake system light comes on periodically but goes out after a few seconds. I recently had my rotors, pads and rear hardware on back brakes replaced. I would recomend to check the wheel ...

...rear pads came with shims but the calipers would not fit over the pads with the shims and I am pretty sure that I the caliper was depressed all the way. I do not have any leaks to the brakes. Master ...

I REPLACED REAR BRAKE PADS ON MY 99 CHEVY S-10, SEEMED FINE BUT THE NEXT DAY LEFT/REAR BRAKE LOCKING UP, HELP PLEASE. sounds like adjusted to tight.

...rear brake hose. Also replaced the front brake pads and rotors as well as rear shoes and all drum brake hardware. Brake fluid was extremely dirty. Bled the brakes forever and cannot get a firm pedal ...

...rear rotors and pads on 1999 4wd silverado, they now get burning hot , greased pins ok, whats wrong ?? make sure the pads move very freely inside the caliper bridge rust can build up and bind pads ...

...rear brake pads on 1999 suburban? I took the brakes off and now I am having problems putting the springs back on. Any solutions on how to make this a little easier? there is no springs on brake pads, ...

rear brakes due to the emergency brake attachment? Unfortunately the only manual that exists is from the manufacture not Haynes. Please advise. Thanks, Vernon Sanborn pads last about 20k, rotors about

...rear . Check with your local parts store they can tell you which is which . also if you are replacing the pads i would make sure the parts you replace them with meet OEM standards . By using good ...

...front calipers all fine. Go to back up now rear brakes are locked up. I'm baffled try to change a new brake caliper bracket and brake pad, the wrong thickness of pad also will make brake locked