Questions & Answers for: GMC Suburban replacing keys

Starting problems This car will just crank and crank but never start. Its getting fuel, Its been tuned and had all of the ignition parts replaced. Could it be the computer chip in the key maybe lost ...

...keys to my 94 suburban and will either replace ignition switch. Or try and get another key made up.Which would be easier/cheaper? I would recommend having another key made. Maybe the dealer, with ...

1997 suburban 5.7 wont start by turning key over but if i just bump key 2,3 or four times it starts. please advise. HERE is a search for the ignition switch you need. this is a very common problem on ...

95 suburban, ignition locks, can't turn key, Ignition locks up, can't turn key, steering wheel or shifter. This is the forth time this has happened. Have replaced the key (ignition) tumblers 4 times ...

tumbler removal need to remove covers surrounding the cylinder then open the key to position 2 ,1 click under the cylinder there is a little metal tab ..you will need to push it in while pulling ...

lost key to sub can i just replace key and switch with one from part store but i was wandering do the key have a security chip in it A GM dealer can make a key for you not on 1995 pass-lock II system ...

when i turn the ignition key over the 1994 gmc suburban will not start. then when i turn the ignition key over again the vehicle will start with no problem. i dont do anything between turning the key ...

...key? Seems strange to me as surely you would only replace the ignition lock if you had lost or broken the original key. Thanks A key code is stamped on the lock cylinder to aid in replacing lost

1999 Suburban fuel pump relay replaced relay and still not getting voltage to pump, where do I look next Did someone check the circuits for the relay to see if it is getting power from the key switch ...

key will not shut off Do you have more than one key? Try another. Same? Make sure shift linkage is correct, and may have to replace lock.