replace the water-pump together with new gasket. 1. Drain the coolant into a container by opening the radiator cap, and the drain-plug under it. 2. Remove the water-pump hose and the bolts . 3. Put in
...tighten things back up. Inspect the water pump shaft and replace it if it is worn or grooved where the seals ride on it. Don't forget to get a water pump gasket and a right crankcase cover
...with all the gaskets and seals necessary to remove the lower front cover and replace the water pump (K&L makes the kit ($25)). You do have to take off the lower front cover to replace the
...engine's timing belt. When replacing the water pump on these engines, always replace the timing belt. Make sure all pulleys and gears are aligned according to specifications when installing the
...water pump. It is a manufactured hole. Is there a bolt that goes back in there? Is it a pressure sensitive thing? What is going on? usaully a hole near the shaft of a water pump is a weep hole and if ...
...actually need to replace the water pump assembly. To see a break down of the pump look here. ...
...away from the engine, replace the pump using a smear of oil on the pump oring tighten the pump bolts evenly replace the water pipes and refresh the coolant, checking the level again after cooling ...
...REPLACE A WATER PUMP http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-water-pump.html ------------------ How to route Water Pump Belt for 1992 Oldsmobile ? ...
...water pump My daughters 90 Honda accord had te Harmonic balancer replaced but shortly after driving the car overheated. Replacement coolant just pours out. Can the water pump be avfersely effected ...
Question about 2004 Civic
...to replace the water pump and timing belt. Then you will be good to go again. So do not drive it for the sake of saving your engine. I'd tow it in to the shop or replace the belt and pump
Usually answered in minutes!
188 Questions
186 Questions
195 Questions
148 Questions
151 Questions