...Tray 1. There is no paper jam. The paper is not feeding. I tried to hold up the Sensor arm and tried to print again. The feed does not engage. I beleive the Sensor may be bad. How do I replace it? ...
...fuser.... I have replaced the toners but there is a problem. What and where I have to go in order to replace fuser, transfer roller and tray-1 pick roller no need to change it just wash ...
Question about CLX-3175FN Color Laser All-in-One Printer
...tray. Try some alcohol on the pickup rollers, rubbing well. If that helps, replace these rollers. Where is the jam happening? Is it right at the print output tray? If it is, where only about 1/3 of ...
Question about CLX 3160fn All-In-One Printer
How do I replace the tray 1 pick roller for my samsung CLX 3160FN printer? Take out the tray, and you will find a pick rubber roller at the base. Even you may clean and use it.
Question about SCX 4521F All-In-One Laser Printer
...Pull the paper tray out and clean the rubber roller. 1 problem in my printer when i copied or scanned any picture or document it give output black line or black ground of paper. what is it solution
...1) replaced pick-up roller & separation pad 2) Solenoids are checked OK but still can't print 3) The paper tray and printer body is not tightly engaged, especially the front end. The small gap ...
...have loaded the tray with paper not full to top of tray. adjusted the size, yet when the roller seeks to grasp paper for printing, the roller does not feed into printer Try replacing the pickup ...
Question about CLP-660ND - - colour - laser - Legal/ A4 - up to 24 ppm / up to 24 ppm
...Tray 1 pick up roller out of the Samsung laser printer model CLP660ND.? I need to replace it This is the easy bit: Turn the printer over so that you can get at the bottom. Remove the tray and the ...
Question about CLX6220FX COLMON MFC Printer
...replace with new tray pickup roller. and also I want to know how to reset the pickup roller counter by placing the printer on "Tech Mode" Do you have a part number for the pick up rollers? Part #: ...
Question about CLP-620ND Color Laser Printer
...replace Multi-purpose pick-up roller for Samsung CLP-620nd (part# JC96-02686B) This is not the roller at the back of the printer, but the one in the front, used to pick up media in the multi-purpose ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions