Questions & Answers for: Chrysler replace timing belt

Question about 2001 PT Cruiser

1 Answer

Timing belt Question My timing belt failed and I had it replaced. Since then the car is slugish under 2500 rpms - top end no problem. Smog test was perfect. Is it possible the timing belt was ...

Ad

...replace a timing belt or chaing? Do I need to be concerned about replacing a timing belt or timing chain at any mileage on my 1999 Chrysler Town & Country with a 3.8L engine? Timing belt ...

Ad

...replace the tensioner. Also spin all the pulleys when the belt is off to make sure they all spin freely. The tensioner will be down lower and it will have a large metal roller wheel attached to it ...

...miles mark. Do not neglect this repair our it can cost you dearly if the belt breaks. It is recommended to replace every 100,000 miles and also do the waterpump and check the timing belt

Question about 2001 Voyager

1 Answer

...replace belt with a cheap belt (had lost of trouble with Life time or hi dollar belts), in the mean time also inspect your tentioner if ani play side ways replace it, also remove idle pulley and spun ...

Question about 1999 300M

1 Answer

...timing belt is intact. If it is bad and you go in to replace it I would do the water pump while you are in there. It will save you trouble and is a really easy job. Good luck and I hope the best for ...

Question about 1991 LeBaron

1 Answer

...replace the timing belt Yes, timing belts should be replaced at about 60,000 miles. Some engines will be damaged if the timing belt breaks. Here is a link with more information. ...

Question about 1997 LHS

1 Answer

...timing belt, when you replace the waterpump on this car the timing belt should be replaced no doubt about it, the timing belt must be replaced and also the pulleys checked and if the car have 100,000 ...

Question about 2001 PT Cruiser

1 Answer

...timing belt tensioner be replaced on 2001 pt cruiser? It is highly recommended that the timing belt tensioner be replaced any time the belt is replaced, if the bearing in the tensioner failed it will ...

Question about 2001 PT Cruiser

1 Answer

...timing belt. Replace them if necessary.Make sure that all timing marks are properly aligned, then loosen the timing belt tensioner and remove the timing belt. Do not allow either the camshaft or ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...