Questions & Answers for: Harley Davidson replace switch

Question about 1993 XLH Sportster 883 Hugger

1 Answer

...replace the switch in it but you'll have to remove the switch housing on that side of the handlebar, unplug the wires for the switch, swap out the switch with a new one, plug the wires to it, and ...

Ad

Question about 2000 XL 1200 C Sportster Custom

1 Answer

...switch. To replace the switch, take the two bolts that hold the switch housing halves together out. Carefully lift the top half of the switch housing and look inside the housing. You may have to move ...

Ad

Question about 2000 FXDWG Dyna Wide Glide

1 Answer

...replace the two switches on either handlebar switch housing. Take the switch housing apart and unsolder the wires from the bad switches. Take the small screws out and replace the switches with new ...

Question about 2000 FXDWG Dyna Wide Glide

1 Answer

...replace the switch. Once you get the rear brake light switch working, if the front brake light switch does not work, it must be replaced. To replace that switch, remove the two bolts that hold the ...

Question about 2005 FLTRI Road Glide

1 Answer

...replace the switch, you must take the two bolts that hold the housing halves together out. Lift the upper half and loosen the throttle cable and idle cable. Remove the throttle sleeve and allow the ...

Question about 2005 FLTRI Road Glide

0 Answer

brake switch for rear brake light replacement Need instructions on front brake switch replacement without removing handlebars. Brake switch on front is stuck and causing brake light to stay on. Thanks

Question about 2005 FLTRI Road Glide

1 Answer

Ignition wire keeps getting hot and burning the ignition switch. I've already replaced the ignition switch once last year and replaced the starter relay switch. That is an indication of too much ...

Question about 2005 FLTRI Road Glide

1 Answer

replace ignition switch key turns 360 degrees, can't turn it off.. There is a groove in the ignition switch housing, the groove runs 90 degrees to the threads on the switch. You need to align the ...

Question about 2000 FLSTC Heritage Softail Classic

0 Answer

...plate. With masking tape mark position of a clock on the wires you remove from switch. Remove switch and replace with new one. Late models are pretty much the same but without odometer knob. Good ...

Question about 2000 FLSTC Heritage Softail Classic

0 Answer

...plate. With masking tape mark position of a clock on the wires you remove from switch. Remove switch and replace with new one. Late models are pretty much the same but without odometer knob. Good ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...