...starter end its the black plastic thing with a single 3/16 allen bolt in it remove it and make sure it is clean no metal shavings(its a magnetic hall effect sensor) if no shavings exist then you have ...
...Was running good until I had to replace the starter clutch your engine is grounding through the clutch cable, causing the heat. This is not good. Check for proper engine ground to frame and
...replace my starter. I dont have the money to have someone else do it. I just need to know what problems I might incurr while replacing it or is it pretty straight forward ? I see there are two bolts ...
...shaped burned place in it, you may need to replace them. Kits are available on the aftermarket or through the dealerships. They can usually be replaced without removing the starter. Good Luck ...
replacing a starter 2003 dyna super glide Hi Anonymous, for more information on your question please visit the websites below and good luck: 2005 Harley Dyna FXDX starter replacement Have nice day.
Question about 2003 FLSTCI Heritage Classic
ran wire straight to starter and it started. havent figured out exactly what is happening. also i just put a brand new coil on and the bike was out in the rain over night. Replace the starter solenoid
Replace the horn. If this fault has happened at the same time as engine wont crank then problem with wiring. If not then check starter relay (grey one). Also check ignition switch. Are the head lights
Question about 2003 FXD Dyna Super Glide
2003 dyna superglide-riding along all power failure,motor died,battery super hot.does not attempt to turn over[like no fire] headlight works on low,horn works,signal nor starter switch work.replaced r
...(0 ohms) across either stator socket - any other reading indicates a grounded stator which must be replaced. THEN remove the ground lead and insert lead it into the other stator socket - the ...
Usually answered in minutes!
652 Questions
681 Questions
595 Questions
586 Questions
644 Questions