Questions & Answers for: replace start switch whirlpool cabrio

replace the breaker. Now the dryer runs but will not heat up. Have had the element and other parts with wires connected checked with ohm meter. All are checking good. Can't find any information on the

replace it. My Whrilpool Cabrio electric dryer wont start It has power but when i push the start button it clicks then a low humm can be heard. I replaced the machine control electronics board but the

Cabrio Dryer The first place any tech is going start at is : Is the start switch working I personaly have seen the plastic part that pushes the switch break and the control housing then needs replaced

...start. Took everything apart and cleaned it, but nothing helps. Is there a part that needs to be replaced? Where can I get it and how do I test it? The main electronic board has a fault and needs to ...

...start. First, check the door switch to see that it is working. With the door open, push the switch and see if the light goes out. If it doesn't, replace the switch. Here is that part to order. If the ...

Why does the sensor light stay on? Dryer does not start. Replace the door switch? The following website has helped me... http://www.partselect.com/Repair/Dryer/Will-Not-Start/

dryer once and washing machine 2-3 times, I packed them up and got rid of them. If you will start to look you will see all kinds of lawsuits against Whirlpool. Can't believe they are still in business

...start turning intermittently. With door open, I can hit button, engage door switch, gently pull drum clockwise and drum will begin to turn. Sometimes it frees up easily, other times it just feels ...

up but will not start. I just replaced the Thermal/Sensor Fuse and still getting the same issue. Any help?? You could have a broken belt. 5his unit has a belt switch if the belt is broken it won't run

...Replace the Top Thermostat as well and the Oblong white thermo fuse on the blower side. The dryer started and ran fine for about 4 loads then quit. All the lights are lit, The board shows "Sensing" . ...