Questions & Answers for: Mitsubishi how to replace a speed sensor

speed sensor a replaced speed sensor out in and instrument cluster still same problem if the problem was the speed sensor then the problem is fixed. But if it was something wrong with the instrument ...

...Speed Sensor and still have same problem but the Drive light is out and when i place into Drive it Jerks and the Netural light blinks, and check engine light is still on, not sure what the problem is ...

...replace a speed sensor on a 2003 eclipse The speed sensor is located on the outside of the transmission case. It is held in by a U shaped clamp with one bolt retaining that clamp, about the size of a ...

...speed ring on the wheel hub for the ABS sensor to read which will activate the ABS when wheel lock up is detected. When the wheel hub is damaged or worn, the speed ring is no longer lined up with the ...

speed sensor or a speedometer cable? yes it does have a sesnor, if the sensor was the problem here the tranmission would also be acting up, the speedo and the transmission use the speed sensor signal.

...speed sensor is the problem in most of these cases and is not hard to replace and i think that will solve your problem. also the check engine light should of come on also, if it did you can have the ...

...not shift when i have it in drive. ive replaced the speed sensor so that isnt it. any ideas please!?? Have you tested the speed sensor to see if it is producing a signal going back to the computer

...replacing speed sensor 2000 mitsubishi eclipse Barcode p0720 replaced output speed sensor now odometer not working you may have to reset the cpu program with a scanner to cater for the new

...replace the speed sensor right away , I had this problem and I fixed it by cleaning it up with mass air flow sensor cleaner just a bit on a rag and clean it and put it back on, if it does solve your ...

...speed sensor and it still blinks nuetral light P0715 Mitsubishi Input Turbine Speed Sensor Circuit Malfunction - Input/Turbine Speed Sensor Circuit Malfunction - Wiring problem ! Check for 5 volts on ...