Inconsistant Blank Streaks I've got a problem with blank streaks down all of my scans, one time it will just be the middle, the next it will be most of the document, very inconsistant. I've clead ...
Question about M4097D IPC Path-Through Flatbed Scanner
...HI, I work on the fujitsu scanner hotline. This message means that the optical unit needs to be replaced, there will be very little you can do to fix this problem. From the 4097d service manual:
Fujitsu pass through scanner issue The scanner is taking too many pages at once. 1. Try changing the separater roller and belt. They do wear out and are consumable. Kits can be found on the internet.
Question about M4097DVRS Path-Through Scanner, Flatbed Scanner
ADF Peripheral cover open M4097D problem Hi I have a M4097D, scans fine from the flatbed but can't scan with the ADF, I get error 20094 Peripheral cover open, or ADF cover open. Could anybody tell me ...
...Replace Pick roller and Pad ASY and see if the error is removed. Check the consumable counter from the TWAIN driver screen. When the counter exceeds the permitted values, replace Pick roller or Pad ...
m4099d scanner abnormal exhaustion error ion-0481918 help please Attributed to paper sensor problems. Clean the little square and round paper sensors under swing arm of upper feed roller asm. also ...
...on the optical path to the front camera.strip and clean.If its still a problem , check and replace front lamp.(the one in the flatbed
...replace the feed roller on a fujitsu 4097 scanner Hi Ranji, Thank you for contacting Fixya. The life span of the Pick roller is about 200,000 sheets or one year. Use Abrasion counter on the operator ...
Question about M4097D IPC Path-Through Flatbed Scanner
Scanner arm is defective. If the machine still is in warrenty you can contact Fujitsu and they will replace it
Usually answered in minutes!
13 Questions
1 Questions
1 Questions