...R517 with the proper 10 k reistor checked d509 found it open no back to back reistance replaced it with a 1 KV. fast switching diode , found C524 measured .24 uf with my capacitor meter and replaced ...
...away any ideas please? Does the led blink? If so how many times does it blink when trying to press power when it shuts off Check resistor r517 if burnt replace with a carbon resistor 10k at
R517 completely burned. Prior to this we could hear what appereared to be a high voltage short or snap that would momentarily blacken the sreeen. This happened on a high humidity day. The high voltage
indicator blink? If so how many times does it blink? It is not blinking at all. Looks bad. It worked before on a different set see if r517 is burnt if so replace it with a 10k carbon 1/4 watt resistor
Question about PT-47WX49 47" Rear Projection Television
...rectifiers) and all are good. Plse explani why fuse and both transistors were blown as i have found replacement but no schema to this TV. Thanks for your prompt response as i await your findings. I ...
Question about PT-47WX51 47" Rear Projection Television
...BUT it repeats the same cycle. Please help. check r517 on the power supply board if it is burnt or damaged replace it with a + or - 5% 10K 1/4 watt resistor this has been a problem in other
Question about PT-47WX49 47" Rear Projection Television
...a click and it shuts off. I have to unplug the power source and plug it again to have it repeat the issue. check R517 on the power supply board if burnt replace with 5% 1/4 watt 10K carbon
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions