Questions & Answers for: replace knock sensor 2002 nissan

Question about 2002 Xterra

4 Answers

...knock sensor came up how to replace it and location fixing the knock sensor what else should I changed since the mechanic is going to go into the engine? i had the same problem my code read knock ...

Ad

...knock sensor located on the 2002 nissan xterra 3.3l v-6 ? I think it is located under the intake manifold. See if there is a wire going under the manifold on the transmission side. Don't replace it ...

Ad

...but has a noise or knock now any suggestions?? Need to replace the Knock Sensor, Very Common issue with these vehicles, quite costly too, depending on where you are located approx. $600-$800

...replace a knock sensor on a 2002 nissan xterra Unplug the electrical plug/connector from the base of sensor. You will have to take out bolt from the head of the sensor that threads into the cylinder ...

knock sensor replcement need location? I just replaced this on 02 xterra 3.3 L V6. The knock sensor is in the center of the engine block below the lower intake manifold. Its a lot of work but it wasnt

Question about 2002 Xterra

1 Answer

...knock sensor. to replace the oxy sensor isn't a problem . but how and where is the knock sensor located... The knock sensor is on the back side of the engine bolted onto the block. It looks like ...

Question about 2002 Xterra

1 Answer

...knock sensor located this vehicle in not supercharged They are located under the intake manifold, one for each bank of cylinders in the 4.0L. Replace the sensors as well as the stub wiring harnesses ...

Question about 2002 Xterra

1 Answer

knock out sensor in 2002 Nissan xterra unless your xterra is supercharged, you really do not need to replace it. its a lot of work, because its located way down under the upper plenum and lower intake

...you want to replace it or not. If you take it to the dealer it's going to be very expensive! Let me know why you are looking to replace the knock sensor, you may be looking at the wrong

Question about 2002 Xterra

1 Answer

these are designed to be placed were they are so it will only pick up a knock from the engine and not other things bolted to the engine. just replace the knock sensor were it was designed to work best

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...