Questions & Answers for: replace hood release cable 2001

...hood manually. I know from reading articles that you can gain access to a cable under the driver's side wheel well, but this would seem to be for earlier models with the mechanical cable. meehan its ...

Ad

...release the hood. Possible Hood latch will not release the hood. Possible broken cable. How do I get the hood open? you need to try to reach for the cable under the car or try to get the cable from ...

Ad

Question about 2001 Mustang

1 Answer

...no obstuctions under the hood. Check your release cable, make sure it's working properly to the latch. Check to make sure the latch is open. Push the release all the way in. Hope this helps. Good ...

Question about 2001 Intrepid

1 Answer

...is broken how do I get my hood open IF HOOD LATCH RELEASE CABLE BROKE AT RELEASE HANDLE YOU CAN TAKE A PAIR NEEDLE NOSE PLIERS PULL THE CABLE ENOUGH TO OPEN HOOD SO YOU CAN REPLACE RELEASE

Question about 2001 Pathfinder

1 Answer

hood release cable seems to be malfunctioning on my 2001 Pathfinder SE. The inside release handle pulls without much restance and does not return to it's proper position. The hood does not unlatch. It

Question about 2001 Accent

1 Answer

...do i open the hood without it? the only way to open the hood is try to take off the panel where the hood release was and try and find the cable so you can open it then get a new cable and replace ...

...hood release. I had this same problem. You will need a length of flexible yet strong wire or cable and a light. Look in the front grill where the hood latch is. There should be a spot to loop wire ...

...to open hood so you can replace fix hood release handle and cable. You will need to take out the bumper , the grill and others components then from there try to move the latch so it can be

Question about 2001 Mustang

1 Answer

...out it being opened and i cant unscrew anything because the screws are under my hood Two people, have one pull and hold the hood release and second person firm fist pound the hood near the latch

Question about 2001 Focus

1 Answer

2001Ford Focus hood release cable I want to replace the hood release cable Remove the handle inside the cap. Your goal is to get 2-3 inches of cable so you can use a vise-grip to pull open your hood.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...