Questions & Answers for: how do i replace my harmonic balancer

Question about 1997 Corvette

2 Answers

...replace part way, hook up a harmonic balance puller, tighten until balancer come free, remove puller, remove HB bolt, remove balancer. Check seals before replacing, if damaged, replace, check keyway, ...

Ad

Question about 1998 Bonneville

1 Answer

...harmonic balancer controls the triggering of the combined crankshaft/camshaft sensor. This controls ignition plus fuel injection. Replace the balancer and adjust the sensor or replace it if

Ad

...replace but.you need a harmonic balancer or crankshaft balancer remover tool and a installing tool for harmonic balancer.WARNING THIS IS A DANGEROUS JOB IF FIRST TIME WORKING ON CAR.YOU HAVE TO RAISE ...

replace the harmonic balancer pulley on the 2000 oldsmobile intrigue The short answer to your question is: 1. Raise the car on the passenger side and remove the front wheel. 2. Remove the belts on the

Question about 2003 Montana

1 Answer

...replace YOU NEED A HARMONIC BALANCER PULLER TOOL AND A 15M SIX POINT SOCKET TO REMOVE HARMONIC BALANCER BOLT.TURN OFF RADIO AND REMOVE THE DRIVE BELT AND REMOVE THE NEGATIVE BATTERY CABLE. REMOVE THE ...

Harmonic Balancer replace now it shuts off after 10 mins of it being on the garage may have did something to the crank position sensor that is located behind the harmonic balance. there is a ring gear

Question about 2001 Grand Prix

1 Answer

...i get a print of instructions remove center bolts and with puller remove the harmonic balancer.then after,to replace install harmonic balancer and the center big bolt with air gun tight it until it ...

Question about 2001 Grand Prix

1 Answer

harmonic balancer remove replace I have a squealing noise in my engine, I have replaced tensioner pulley, idler pulley and belt. Is it the harmonic balancer, and how difficult is it to replace?! i ...

...do you have to remove the harmonic balancer to replace the crankshaft position sensor ? Yes you do....its right behind the harmonic balancer, note...do not use a pry bar to remove the

...replace a harmonic balancer on the mazda 6 2007 Ball park figure here but not your vehicle. https://www.yourmechanic.com/services/crankshaft-harmonic-balancer-replacement and the part is here. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...