...displays sc546 sc 546 fuser temp changes more than 20 degrees after warm up. clean thermistor if tat dosent work check fuser connector. reset= enter service mode turn copier off wait 5secs then
printer display error code sc545 how do i reset it Clean the fuser unit thermistors and rhermofuses and enter in the service mode SP mode ,open the front door,turn OFF the main switch and unplugged ...
...replace the thermistor. open the right side and the front cove, the fuser is located on top of the OPC carriage unit, push the blue level going to the right side while pulling the fuser unit. after ...
sc 545 code Fuser warm-up error. open fuser lamp, defective thermistor, open or defective thermostat.
where is the thermistor on savin 8025e i am looking for thermistor It is resting against the upper fuser roller
SC542 Error Savin CLP131DN fuser temp warm up error. Open thermostat or defective thermistor. also open fuser lamp
savin error code Sc542 Dirty fuser thermistors
sc541 savin mlp35n sc 541 error Dirty fuser thermistor.
Question about MLP35N Cassette 250 Sheet Tray Genuine
...now - How do I fix alignment? That error code is a dirty fuser thermistor. Clean it and go into service mode then turn off main power switch. That is all that is required. What is out of
Question about MLP35N Cassette 250 Sheet Tray Genuine
...fuser? When reading the thermistor, grasp the sensing part between thumb and forefinger, if reading drops quickly the thermistor is probably goid, if so , unfortunately you may need a power supply ...
Usually answered in minutes!
34 Questions
16 Questions
12 Questions
1 Questions
6 Questions