...replace the fuser. Sometimes I have sen a buildup of toner on the thermistor. If you can get to it. You can try to clean the toner off. Be careful. Very hot. Service call 172: Error or 173: Error is ...
Oki C5800 constant 172 fatal error This error code means that the fuser temperature is low. You need to replace either the fuser or the thermistor inside the fuser.
...be replaced. OKI B4350 171 is Upper Thermistor, State: Open Check the heater connector and the thermistor connector to make sure they are seated properly. If OK you probably need to replace the
...Replace the Thermistor and turn off the 1 Upper roller 2 Lower roller 1 b Thermostat Thermostat Heater Between pins a and b: Between pins c and d: 231.4kω Between pins e and f: ...
Where can I find a replacement Thermistor for an Oki C9300 fuser unit? The fuser is sold as whole unit. Just find one and order it and replace it yourself, it is a user repalable item.
...heat roller thermistor (low temperature) Check the heater connector and the thermistor connector to make sure they are seated properly. If OK you probably need to replace the fuser. Hope this
error 72 is a thermistor open error in the fusing unit. Possible causes are a failed thermistor or blown lamp in the fuser. Will need a replacement fusing unit to fix the problem.
...what is this error and i want to know how to repare Error code: 173 This error code means that the fuser temperature is low. You need to replace either the fuser or the thermistor inside the
...Replace fuser or thermistor in the fuser - per Oki Svc Mnl Fuser error. Replace fuser or if no-go, Main board. If I could be of further assistance, let me know. If this helps or solves the issue, ...
fuser rollers making the thermistor see nothing hence the 928. If there is no paper in the fuser then it will need to be replaced. Remember to turn the machine off when removing or replacing the fuser
Usually answered in minutes!
259 Questions
172 Questions
152 Questions
147 Questions
126 Questions