...have a meter you can ohm out the temperature probe make sure it reads around 1270 ohms. if it is way off replace the temperature probe if it is close to 1270 replace the EOC. (Electronic Oven
...about it. It just says random time. What should I do? More than likely the EOC will need to be replaced unless you don't care what time it is and the other funtions are working properly. ...
...is an electronically controlled range, then sadly the problem is probably in the Electronic Oven Control and the only repair is to replace the EOC. We are at the mercy of poorly made electronics. ...
Question about CWE4800A Electric Single Oven
We had a lighting storm and the current went off. When the current came back on the oven door locked and now wont open. The lighting has sent a surge though the control board, in return, causing a ...
...replace the EOC (Clock). Warning: If you feel in any way uncomfortable performing this test or making this repair, please contact a qualified appliance repair technician. 1. Disconnect power to the ...
...F1 code is a defective electronic control(clock). There is no reset or quick fix. The EOC must be
...EOC: http://www.fixya.com/support/r3727366-replacing_control_kitchen_range If either of the oven features are still working (e.g., broiler still works, but bake does not and vice versa), the problem ...
Question about MER5750 Electric Kitchen Range
...replace the EOC. The following link explains how: http://www.fixya.com/support/r3727366-replacing_control_kitchen_range Replacement parts (if required) can be purchased at any of the following ...
Question about MER5750 Electric Kitchen Range
...EOC (also known as an Electronic Range Control - ERC) board should correct the problem. The following link explains step-by-step how to access and replace the control board on MOST electric ranges: ...
Question about MER6772 Gemini Electric Kitchen Range
Bottom oven bottom element doesn't heat the bottom element in the bottom oven doesn't heat. I replaced the element but still doesn't heat up. Phil. If you do not have voltage at the element, then the ...
Usually answered in minutes!
465 Questions
236 Questions
105 Questions
81 Questions