Questions & Answers for: Troy replace cord

.... thanks Remove the housing covering the clutch. The cord spool can then be accessed. Replace the cord. Be careful that you maintain the proper spool spring tension. Check operation before ...

...replace the cord. Looking for instructions. Thx there should be four bolts holding the cover on that houses the pull cord assembly take the bolts out look inside you should see the rest of the broken ...

...it back together cord probly dry rotted if the cord is in really bad shape you can buy a complete ...

replacing pull cord on 4 cycle gas trimmer, troy bilt - cord broke at full pull. Have been able to detach shaft but in order to get to cord gear must remove from main cowling. It appears the the free ...

...do I get the plastic cord holder out of the shaft, to replace the cord? You nnnd to un-screw the srews that attach the housing to the engine. There will be 4 more srews to un-screw to get to the ...

...3-4 Inches Then Sticks I was replacing the spool head on my Poulan Weedeater Featherlite. After I replaced it, I was unable to fully pull the cord to start it. I don't think the piston is seized ...

Pull cord replacement how do i remove the rivets of the pull cord housing. You don't, you must remove the entire housing to replace rewind parts.

...replace it? you can buy new starter cord from smallplantsalesuk on ebay ,as to fitting the new cord,don't know your machine but you need to remove the cover where the cord comes out,normally removing ...

replace pull cord Replacing a pull cord is not easy. After you remove the shaft, then the drum cover, you are left with the drum and clutch. There is a screw in the center of the drum which has to ...

...replace pull cord Take off the housing I'll out the turn the spring loaded husing to full extension put a screwdriver to hold it in place replace the cord pull out the screwdriver and replace ...