Questions & Answers for: Chevrolet Blazer replace brake light

...brake light on top of the blazer is working We bought a 2000 Blazer in '02 and one day I noticed there were no brake lights, but the 3rd light on top worked fine. I did some research online and found ...

...replace it with a new one. I now have brake lights. He had been looking all morning for the switch but could not find it, and he is an ace mechanic, so thanks to Ron for his expert advice. You guys ...

brake light on the brake light on my 1996 blazer will not shut off, i have checked the brakes, e-brake and fluid all is fine how can i get it to shut off? There is a brake system balance valve that ...

...I had my wheel bearings replaced last year. Turn signals work, and third brake light bar works. Check your wires, the smoke could mean an electrical fire. it is your turn signal switch around ...

...brake light and is a seal unit. You may have to replace the unit, there is a relay for the third brake light and that is located on the glove box behind the panel that say's relays. There are three ...

...brake light works the main brake lights don't work ? The outer brake lights work off the brake light switch mounted by the brake pedal so that will need to be replaced. The 3rd brake lamp is powered ...

...brake light above rear window does Replace the multi-function switch in the steering column. The 3rd brake light is powered directly off the brake switch while the regular brake lights are wired thru ...

...brake light bulb should be the replacement bulb,BUT check with your auto parts dealer just to be sure. replace the bulb,and it should work. if not, then with battery disconnected add bulb grease to ...

brake lights start to work replace the switch. Let me know if none of those work, they usually do, and I'll get you some more in depth diagnostic info. There's a switch on the brake pedal arm that

...brake, if the lights start working, replace the switch. Check to see if the hazards 4 way flashers make the lights light on all sides . I f the bulbs light its not a connection problem and must be ...