Questions & Answers for: replace blend door actuator 2003

Blend Air Door actuator probably caused it to break. The dash will have to be removed to replacethe door and the door actuator. YOU EITHER HAVE A PROBLEM WITH THE TEMPERTURE ACTUATOR OR LOW ON COOLANT

...blend door jeep liberty 2010 no heat My blend air door is stuck on my 2010 liberty. I have removed the actuator panel on the drivers side and the middle door that controls the air flow to the dash is ...

2005 jeep liberty sport manual blend door acuator located The blend door actuator will not be the problem, the blend door will be stuck or broken, common problem.

...blend door under the dash. Could be a faulty blend door actuator, or the main controller. You may need a shop manual to make the repairs since this is generally beyond the abilities of a DIY repair ...

Blend door is not moving to open to the heater core. Coud be that the cable is not connected to the dash lever but if it's vacuum actuated the vacuum line could be off. Check that your getting vacuum

...flushed the heater core and still no change. What could be wrong? Blend door may be sticking thus mixing too much cold air with the hot. Bad blend door actuator, vacuum leak or blend door seal is

...blend door or bad blend door actuator My guess is thermostat is stuck open will need replacing If you're thermostat is stuck open, it's only going to get so warm. If it's really cold outside, the ...

blend door actuator, coolant level is good, and hoses to and from heater core are hot when vehicle is running and try to run heat. When changing the temperature dial from cold, the AC works, to hot it

...the blower, I only get air out the windshield window vents to defrost... any ideas Blend Door Actuator problem. See the link and videos. 2012 jeep liberty blend door actuator replacement Google ...

...Liberty blend door actuator needs to be replaced. Want to try and do it myself as the dealership wants to charge $1500. Help! see link ...