Questions & Answers for: replace 2000 chevy silverado 1500

...2000 silverado 1500 pick up front end. Checked the front end and find nothing loose Replaced the rack & pinion on the drivers side, problem still exists. There is a intermediate shaft between the ...

...replace rack and pinion on chevy 2003 silverado Silverados do not have rack and pinion steering. The steering box is bolted to the frame on the drivers side, that can be removed by removing the bolts ...

...silverado 1500. I looks as if the rack and pinion is leaking from the seam adjacent to where the steering linkage is connected. This seam is were both halves of the rack and pinion come together. But ...

...pump. That did no good. The trucks like yours have a rack and pinion steering, and when rack and pinion steering need replacing they get hard to turn in one direction just as you have

...2000 chevy silverado with an 8.6 rear end and i am leakin fluid around the pinion seal and it is new do i have to put silicone around the splines to seal it If the pinion is not tight enough,and the ...

chevy silverado 1500 The pick up makes a "thump" sound whenever a turn is made (both left and right turns). Not sure how to tell if it is problem with rack and pinion or hub/bearing assembly

torque specs for pinion nut 2000 chevy 1500 I have a 99 Silverado with the 8.6 3.73 rear diff. Is the torque specs for the yoke the same as a GMC at 270 ft lbs?

...replace Power steering rack and pinion gear on Chevy Silverado 2500 HD? http://technoanswers.blogspot.in/2012/02/how-to-replace-power-steering-rack-and.html ---------- How to replace Power Rack and ...

...chevy silverado 6cyl. it has 180,000 miles on it. a couple of years ago it started wobbling but now it has gotten alittle worse. I replaced the tire rod ends and wheel bearings but i still have a ...

...and pinion on my 2000 chevy silverado 4.8l to drop the oil pan? because i tried everything to remove it! the only thing in the way is the rack and pinion, won't pull out. Have you lifted the