Questions & Answers for: repairing start button lg front

...button and the washer should turn on. Walk away leaving the machine on. When I did this, I came back to find the drum light off and machine would start on command now. Good luck. I checked with a ...

...it worked and gave me a spin only cycle. Have not used it in so long, now i need it again Anyone know the buttons for spin only cycle? turn power on, then hit the spin speed option button then

...start button, i used it several times already today? Had the same problem today. On the front bottom left hand side there is a small door. Open the door and unplug the black rubber hose, this will ...

...failed and needs a technician to come out and repair the unit. To remove the water, turn on the unit, press the spin speed button once and press start. It will drain the water out and spin the

start button. The door wont open or close. I can hear the latch moving inside but nothing will happen. The "Door Locked" light start flashing. Any ideas, thoughts now how to fix this? I just

...start button is a challenge. I know the bearings are bad because I saw them yesterday and it squeaks like a friggen mouse on steroids. (lol) My motto laughing about a dilemma is far better than ...

how do i repair start/pause button you dont try to repair it if you do it your board may be comletely or partially gets damaged which may cause malfunctioning so u better contact to your near lg store

START/PAUSE button. Once the washer has drained, restart the wash cycle. If the tE error code appears again, close the water taps and unplug the washer. The washer will require repair service. it is a

...button for 5 seconds and the the start for 5 seconds and then plugging in, nothing. I also read and tried turning drum 4 times clockwise and 4 time counter clockwise then plugging in, nothing. I did ...

...LG Washer just started an issue where it won't turn on when pressing the power button. But if i unplug it for 10 seconds, then plug it ... FIXED - WM3360HVCA LG Washer Won't Power On Sep 30, 2019 ...