...repair person said to use a vcr as the tuner and the cable would work. (R/Y/W) are located in the front. The cable does work for 10 seconds, and then vcr cuts off. Are you talking about the part that ...
...repair. The laptop must be dis assembled to get at the power jack, and when you do get to it, it takes a deft hand and soldering skills to swap one out successfully. I have done a few and am ...
...Cable-50-4H515-001-/110525996737?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item19bbdcdec1 This link is for the illustrated guide to removal of the motherboard. ...
...cable and the yank sideways destroys the jack... AND the jacks are really weak and poor to start with... Take the thing in for repair, or if you are electronically adept replace the jack yourself. ...
...repair it? I suspect that the jack on the computer may have failed or the end of the cable that you jack in has failed. The green light indicates that power is getting to the speakers but not the ...
...when I move the jack or the cable. It seems that the wires inside the VGA jack are brocken. Could you please send me the wire scheme inside the jack, so I could repaire it. Thank you. key ...
Question about Les Paul 100 Electric Guitar
...cable which allows unscrewing the jack, take it apart and look for a loose / broken connection. Repair would be to solder it back. If the jacks on the cord are the molded type, the most practical ...
Question about D52GW12 52" Rear Projection HDTV-Ready Television
...cable fitting--most of those I do it is around $100 repair (mostly labor). What I am saying is it is much easier and cheaper to bypass it than repair it.(YOU WILL LIKELY FIND IT PROVIDES AS GOOD OR ...
repair center that will do it for $50-$75 and give you a warranty as well.A DC jack often become loose if it is allowed to directly bear the deadweight of the heavy AC/DC Adapter on the power cable or
Question about Rise Up Over-the-Ear Headphones
jack and the cable pulled out of the volume control. Can this be repaired? I still have the broken piece of cable if that helps if jack and wire are not destroyed --open jack and solder wire back into
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions