Questions & Answers for: kawasaki KE 125 removing plate

same as above/ You have a bent shift fork. The repair means taking the engine out of the frame then removing the top end, removing the flywheel and electrics, removing the clutch , shift mechanism and

Changing clutch plates on a 1994 KE 100 I have to change the clutch plates on a 1994 Kawasaki KE 100 and I don't know if I have to split the crankcase or if there is an easier way. All you need to do ...

Hi I have rebuilt the bike with a rebore due to some scoring and fitted new crank seals, the bike has only done 1200 miles from new, it runs real bad and has lots of fuel blowing back thru the carb. ...

i have a kawasaki 125 dirt bike it gets fule and sparkes but will not run pull started it and sat and kicked for hours what could be wrong Bottom line is it needs some attention. Remove the tank and ...

point setting what is the points setting where is the fireing point The points should gap at .015. Put a timing light on the flywheel then rotate the plate the points are mounted to to set the timing ...

I need to change the clutch on my 1981 Kawasawki KE125 How do I access the clutch plates on my 1981 Kawasawki KE125? I have never changed a clutch before. I tried adjusting it but it still slips when ...

I don't know what make my bike is so I picked one at random How do I remove the steering stem from my pit bike forks I've got it to start wobbling but i'm not sure what way the yolk comes off? The top

I want to change clutch plates on 1976 ke125. Which side of the engine do I access that through. The side with the carb. or other? Thanks the sibe with the kick starter.

Is there available parts for rotary gear valve and plate valve. Your bike is in the range of A9-A12 being 1983. Checkout wemoto.com/bikes/Kawasaki/ as they are the largest Kwaka spares department I ...

we have 75 125 ke. my son developed a problem where as soon as you release the clutch , it surges forward then dies instantly, i've tried adjusting clutch cable but with the same results, could ...