Questions & Answers for: Chevrolet Blazer removing plate

Question about 1985 S-10 Blazer

1 Answer

insall new ignition switch Hello there sboris86, Changing the switch is easy. Getting to it is a bit involved. You'll need some specialized tools. A steering wheel puller Lock plate compressor Torx ...

Ad

...plate I can't help you with the srew, it takes what ever it takes to remove it, have you drop the steering column dowm by removing the column clamp on the bottom of it, you have to drop the column to ...

Ad

Question about 1989 S-10 Blazer

2 Answers

Dash iwould like to know how to remove the dash and relace witout using a glue on cover REMOVAL & INSTALLATION Disconnect the negative battery cable. Remove the ashtray. Unfasten the accessory trim ...

HOW TO REPLACE HAZARD SWITCH IN 1997 CHEVY BLAZER. IT WILL NOT GO OFF You have to unhook the battery then you have to remove the two screws that hold the horn on next remove the ring that has three ...

i have a 87 blazer s10... the turnswitch /wiper/highbeam switch is broken and is shorting out my brakelights ..i cant seem to get to it.. took the steering weel off but ..? You took off the steering ...

dash board is digital and the dash lights went out seeking information on how to remove the dash board console 1993 chevy blazer tahoe LT Remove the 5 mounting screws from the instrument cluster trim ...

Question about 1999 Blazer

1 Answer

broken flex plate what is the easiest to remove and replace There is no easy or quick way. You are going to have to remove your transmission or at least move it back far enough to access and replace ...

Question about 1985 S-10 Blazer

1 Answer

1985 chevy blazer steering wheel removel Remove the horn button, it should pop off unless you have the deluxe wheel in which case it is held on with 2 Philips screws on the back of the wheel. There is

Question about 1997 Blazer

0 Answer

97 blazer factory radio removal 1997 Chevy Blazer radio pull out. Remove the screws that retain the instrument panel accessory trim plate to the instrument panel. Remove the instrument panel accessory

how to remove rear bumper 1999 blazer Hi there:Check this Removal Procedure...1. Remove the rear bumper step pads. 2. Remove the license plate lamps. 3. Remove the nuts and the bolts that retain the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...