Questions & Answers for: removing the motor cover Food Mixers

...motor in a Hamilton Beach 950 drink mixer. The trouble I am having is with the cover. I can only see two screws that hold the cover on. That side will lift up, but the front side wants to stay in ...

assemble and test unit.I thought I had a problem with the control panel or the motor, as it turns out the connections were the problem. Carefully removing them and reinstalling them solved the problem

...removing the four screws and lift off after you have done this you can lift the motor out but remember you still have the wires connected but you can get at the screws to tighten the head down try ...

...the motor and then there will be four nuts that hold on the back bearing cage of the motor. After removing that, you will find 7 large screws in beside the motor that remove the gearbox. Best

assemble and test unit.I thought I had a problem with the control panel or the motor, as it turns out the connections were the problem. Carefully removing them and reinstalling them solved the problem

...motor inspection cover. There 's a bearing with a nut, how to remove the nut, the rotorshaft keeps turning. First, remove the steel ring sitting recessed into the hole where the nuts are. Remove the ...

back cover off the motor and then there will be four nuts that hold on the back bearing cage of the motor. After removing that, you will find 7 large screws in beside the motor that remove the gearbox

...motor area to remove the dry dough hi. 1. remove the screw near the cable. 2. use something sharp, small and robust to lever out the white screw cover which is underneath and in the middle. it looks ...

...motor rear cover. The brush mount plate may have moved out of position, which retimes the rotor and stator windings. With the power disconected and the rear main cover removed, look at the internal ...